Core 6 is magical and much of that is thanks to your wonderful programming skills. I personally value your input into Kiran’s creation. You have given us so many options, and have enhanced our ability to present to our clients possibilities to experience at depth the beauties of CoRe. The ongoing fine tuning brings more enhancements for us to use. With each update I find something that was not there before. Your recent adjustment to how we can now load frequencies has helped me have a more organised database. I am very grateful, and I thank you.

Protocols are proving very time saving and most of my evaluating is now done this way. It has meant developing a lot of new screens to section the database to meet my objectives. I still have more work to do here to cover further situations specific to clients. Protocols are truly time saving.

From METHODS, COMMUNICATE I am using for some Organ Balancing where I want to communicate to the whole organ and have the benefits of carrier frequency, light dark etc. I am also here using this option to add my touch to what is communicated. I am not a Homeopath so I am using the potency option to add things like say if I am treating a burn with Aloe Vera I will add in the potency option a direction to the location of the burn or for a deep emotional issue I may use the potency option to direct the remedy to the inner child. Being able to potenise each resonance differently does extent your range of possibilities.

Skins – With the latest updates I am having fun with changing backgrounds, skins, icons. With my image selection set to random it’s a nice daily dose of DLE to see what comes forth. With screen images, to have more than one picture as Kiran has on many of his screens I am using PowerPoint to build my screen image and saving the slide as a JPEG image before importing into CoRe.

Recordings – I am finding that clients are willing to listen to recordings of frequencies (using Sine wave) so I am using this option often. A ten minute recording is small enough to email.

The Dual Frequency option that evaluates for resonant settings is bringing noticeable quicker relief for clients with acute issues. Often I find that Core is suggesting many short sessions at different settings.

Single resonance selection. Being able to have a very focused access to select resonances to evaluate from within groups is assisting in building a picture for my clients. It is simple to now take the top result from one evaluation to include it in the next.

So it is now about 5 months since the release of CoRe 6 and it is ticking over nicely with refinements constantly being added. I am finding it filled with options, potential and still much to understand (especially Quadtrinity). Here I have indicated some of the ways that I am using CoRe. Please help me keep a conversation going by adding your insights or even questions. Over the past few weeks I have had the pleasure of sharing CoRe 6 with several of the local users and we have all learnt from each other. Here we have the tools in this forum to make that sharing a global event.

Joan Shadbolt,
Sydney

If I am using excel to load the frequencies how do we get it to associate to the User Freq. At the moment any freq that I load are appearing under User Custom Resonances and I am having to include them in the Single Freq Screen to be able to use the Freq generator option.

Regards
Joan

reply from Dima:

Hello Joan,

In the last build (442, it will be available for download later this evening) we have implemented some additions to address your issue, please follow the steps below:

Yes, this is right you need to do following steps:
1. import frequencies from excel using Utilities->Import from excel

a. Please use check box “Importing frequencies” to let the program know that you are working with frequencies

b. When “Import” button is pressed please select screens that you would like to have imported frequencies associated with

i. Please note: if you checked “Importing frequencies” all selected resonances will be placed in Resonances/User frequencies subcategory

ii. Also if “Importing frequencies” is not checked, but you have selected “Single frequency therapy” as one of the screens for import then all Resonances will be imported as frequencies into Resonances/User frequencies subcategory

2. To run frequencies please do the following:

a. make an evaluation of frequency groups from such screen

b. create a report based on evaluation results

c. in the report you will find a button “Run frequency therapy”, click on it and Frequency generator form will open with all frequencies that the report contains

3. If you would like to manually pick frequencies that you would like to generate then do the following:

a. include imported frequency groups into Single Frequency screen

b. Open this screen, select needed groups and frequencies, then press button “Run frequency” from the same drop down window, see the second screenshot below.

Edson.
Curitiba/Brasil

Sorry Edson – I did not see this comment – thank you for the great seminar in Curitiba – greetings from Campinas

Thank you Kiran for making all this for as.

Diana

… and much more is coming Kiran

mit herzlichen Grüssen
Wolfram

Kiran’s comment :

The first LaesEr systems are beeing shipped right now – please check our practitioner site http://www.iimed.info or contact our dutch distributor “Jerry Van den Bosch” , for references – let us know ho it goes

Kiran’s comment :

please keep these observations coming

Would you please take a look at the website link below and tell me how the CoRe generated frequencies and other frequencies like Rife, etc., relate to the microcurrent frequencies that Dr. McMakin is using in her Frequency Specific Microcurrent practice and trainings. some day I should do an in-depth study of electricity and electrical frequency but until I do I need to have someone explain the differences to me. I know that you prefer client specific frequency application and that does seem logically to be a superior way to go, but Dr. Mcmakin’s frequencies definitely work and I know this from direct experience.

http://www.frequencyspecific.com/

All my Best to you, Kiran,

Marshall Hornstein

Hello Marshall

he uses a terminology that is not something what a physicist would say – he wants to say that he is using a specific frequency – different then what other stone-age-electricity-applying doctors are doing to just apply – electricity without looking at the frequency they use – its like saying “I invented food-specific eating instead of just eating anything”

In this naive way of calling what he is doing of course all Rife or Hulda-clark therapy is “Frequency-specific therapy” – the only thing that is worth mentioning is that he is also doing what I see as very important to “use 2 frequencies at the same time” to create an interference – he uses on one channel 13-40 Hz and on the other around 400 HZ

but all this is far inferior to the CoRe dual channel technology that finds client specific frequencies on both channels

Kiran

This is great! Can you do something loke this for HN and (how to use) CoRe 6.0. version? 6.0 has so many great possibilities, but many of them are not usable (like audio files of remedies) and so on.
Explanations like this for 6.0 ( and an additional button in 6.0 to acces to all screens allways and anywhereon software will be of great help (please also for button for DLE selection in frequency therapy screen, as you promise in Belgrade)!

I understand, that you live today in tomorrow, but we are not all like you, and please understand, that we need perfect guidance to use CoRe system as it had to be used – not becouse of us, but becouse of our patients.

Your job is great, but please take a time also for us, that your inventions will be for the best use and results!

Mojca

Kiran’s comment :

Dear Moja
thank you for your appreciation – just believe me – my life is 24 hours a day (even when I dream) about CoRe and its healing and spiritual dimensions.
I have to be an inventor, creator, producer, trouble-shooter, motivator besides being a teacher – and like myself I have to beg you for patience with yourself and with me – all will come in due time

Kiran

Kiran’s response :

Thank you Jerry – you had a difficult start in a flat terrain like Holland where everyone knows everything about everybody who stick his head above the average and where reputation is easily ruined because one person makes a few bad moves – as has happened in the Netherlands – but you have pulled the boat out and the last seminar was infused with a very positive spirit – please keep on posting

Due to these new features a lot of Hungarian practitioners with 5.0 till now order the 6.0 upgrade – most of them together with the ECM/TCM modul. The ECM/TCM gives them a totally new way of analysis and very convenient way of treatment. Who is not an expert in this field now has a great help to learn better TCM with the detailed graphics and descriptions of meridians, acupuncture points, five elements.
The very nice and helpful report of this module is a big bonus too.

Another very popular addition is the Virtual Doctor. Most practitioners have a plan to introduce this convenient, home treatment to the patients living far away. Of course with Virtual Doctor they can broaden the circle of his/her patients. Weather you like it or not this is the trend now. More and more things can be done without personal contact and I think it is very much fit into the concept of informational healing as it is independent from time and space. We can feel the complete trust towards another person even if she/he is far away. What a great vision!

And the new communication window: we experienced that people very easily understand the concept of light and dark side, and didn’t get any suggestions about excluding the dark side. Energetic carrier can really deepen the effect of informational therapy.

Some Hungarian practitioner works with a huge number of patients daily and the total time of analysis is a main issue for them. They are more than happy with the custom protocol setup, which can save precious time for treatments.

Thanks to all for this great development!

Pal and Agnes from Hungary

Kiran’s response

Dear Pal and Agnes – thank you for providing the CORE in the South-East of Europe for CoRe information and for organizing such a good seminar

please be more active on the Forum

Kiran

with love
nin

Kiran’s reply :

The Integrator is the amplifier the LaesEr is the data-acquisition device – so you need them together. The LaesEr is also equipped with a button that allows to sense brain-waves but we are not jet offering the required electrodes – for now you can do much more with the LaesEr than with a conventional EEG or ECG system. So with the device and applicators that we have now you can not only measure brainwaves but the composite body-energy-waves and even the surrounding field – so dont even think about the outdated EEG methods – get the Bio-LaesEr Integrator package and be surprised. Also we are developing special software as the one you saw – but this is still in the making.

Kiran